Copyright @ALE 2020 All Rights Reserved
The following table lists the parameters you can use to configure the administrator password.
It configures the password of the administrator.
String within 64 characters
Maintenance -> Change Password
You can lock the IP phone to prevent it from unauthorized use. Once the IP phone is locked,
anyone must enter the password to unlock it. The default password is “0000”.
Note: Once the phone is locked, the user can input the password “0000” to unlock the phone.
But if the default password is modified and lost, the user can reset the parameter
“ScreenLockPassword” in configuration file.
Topics
Operation Behaviors on Lock Phone
Phone Lock Configuration
When the phone is locked, you are allowed to initiate a new call to the emergency number.
The following table lists the parameters you can use to configure the emergency number.
It configures the emergency phone numbers when screen is locked.
Setting -> Phone Lock -> Emergency Call
The following table lists the parameters you can use to configure the phone lock.
ScreenAutomaticLockEnable
It enables or disables the phone lock feature.
Setting -> Phone Lock -> Automatic Lock
Basic Setting -> Phone Lock
It configures screen Saver timeout.
To Next Page
Loading...
