Alcatel-Lucent Halo H6 - Phone Customization

Copyright @ALE 2020 All Rights Reserved
95
21600-6h
Default
True
Web UI
Setting->display-> Timeout
Phone UI
Menu->Basic Setting-> Display-> Screen saver->Wait Time
You can change the backlight brightness of the LCD screen during phone activity and inactivity.
The backlight brightness automatically changes when the phone is idle for a specified time.
You can change the screen backlight brightness and time in the following Settings:
Active Level: The brightness level of the LCD screen when the phone is active. Digits (1-10)
represent different brightness levels. 10 is the brightest level.
Inactive Level: The brightness of the LCD screen when the phone is inactive. You can select a
low brightness or turn off the backlight.
Backlight Time: The delay time to change the brightness of the LCD screen when the phone is
inactive. Backlight time includes the following Settings you can choose from
Always On: Backlight is on permanently.
15s, 30s, 1min, 2min, 5min, 10min or 30min: Backlight is changed when the phone is inactive after
the designated time (in seconds).
Topics
Supported Backlight Options
Backlight Brightness and Time Configuration
The following table lists available configuration options to configure the backlight of phone
models/expansion modules.
Phone Model
Configuration Options
Halo series IP phones
Inactive Level
Active Level
Backlight Time
The following table lists the parameters you can use to configure screen backlight brightness and
time.
Parameter
BackLightLevel
config.<mac>.xml
Description
It configures the intensity of the LCD screen when the phone is active.
Permitted
Values
NUMERIC[1,9]
Default
5
Web UI
Setting->Display->Active Backlight Level
Phone UI
Menu->Basic Setting-> Display-> Backlight->Active Level
Parameter
InactiveBackLightLevel
config.<mac>.xml
Description
It configures the intensity of the LCD screen when the phone is inactive.