Copyright @ALE 2020 All Rights Reserved
The IP phone will send the code to deactivate anonymous call rejection feature on server-
side when you deactivate it on the IP phone.
Example:
AnonymousCallRejectionOffCode1 = *87
String within 32 characters
Account->Advanced-> Anonymous Rejection Off Code
Menu->Features->Anonymous Reject->Account X
Call number filter feature allows IP phone to filter designated characters automatically when
dialing.
Topic
Call Number Filter Configuration
The following table lists the parameters you can use to configure call number filter.
It configures the characters that the IP phone will filter when dialing.
If the dialed number contains configured characters, the IP phone will
automatically filter these characters
when dialing.
Example:
CallNumberFilter = -
If you dial 10-1, the IP phone will filter the character - and then dial out 101.
String within 32 characters
Setting->General->Call Number Filter
You can phone the phone whether to receive or place an IP call.
Topics
IP Address Call Configuration
Accept SIP Trust Server Only Configuration
The following table lists the parameter you can use to configure IP address call.
It enables or disables IP address call feature.
Note: The parameter can only control the outgoing IP address call. If you don't want
to answer the IP address call, you should phone the parameter of
"SIPPeerFilterEnable" to true
To Next Page
Loading...
