Copyright @ALE 2020 All Rights Reserved
➢ Consultative Transfer call : party A is in an active call with party B, party A click Menu
Transfer to input party C Number, party A will begin a new call with party C by click Menu
Call , Then ,party A can transfer this call to party B (the third party) by click Menu Transfer ,
and party A will disconnect.
You can configure the transfer mode for the IP phone when transferring the current call via a
specified DSS key. Halo IP phones support the transfer modes: New Call, Blind Transfer.
The following table lists the parameter you can use to configure transfer mode for Dsskey.
TransferKeyAsBlindTransfer
It configures the transfer mode for DSS key. When the user presses the DSS Key during a
call, the DSS Key behavior depends on the transfer mode.
Halo IP phones support local 5-way conference and multi-way network conference.
Topics
Local Conference Configuration
Network Conference Configuration
The local conference requires a host phone to process the audio of all parties. Halo IP phones
support up to 5 parties (including yourself) in a local conference call.
You can enable or disable the local conference feature, and configure the way to phone up a local
conference.
For Halo IP phones, you can merge two calls into a conference directly by tapping the Conf soft
key or Conf hard key
To Next Page
Loading...
