Copyright @ALE 2020 All Rights Reserved
Note: It works only if “LocalAdmcfgDstEnable” is phone to 1 (Enable)
Setting->Time&Date->Offset(min)
You can configure the time and date manually when the phones cannot obtain the time and date
from the NTP time server. You can phone the time and date by phone web UI.
You can customize the time and date by choosing between a variety of time and date formats,
including options to date format with the day, month, or year, and time format in 12 hours or 24
hours, or you can also customize the date format as required.
The following table lists the parameters you can use to configure time and date format.
It configures the time format.
0-Hour 12, the time will be displayed in 12-hour format with AM or PM specified.
1-Hour 24, the time will be displayed in 24-hour format (for example, 2:00 PM displays as
14:00).
Setting->Time&Date->Time Format
It configures the date format.
To Next Page
Loading...
