Copyright @ALE 2020 All Rights Reserved
It configures the label displayed on the phone screen for a specific programmable key.
This is an optional configuration.
String within 64 characters
long press softkey to enter programkey configure menu
It configures the value for some programmable key features.
For example, when you assign the Speed Dial to the programmable key, this parameter
is used to specify the contact number you want to dial out. It is also used to specify the
contact number with the DTMF sequence. The contact number and DTMF sequence
are separated by commas.
Note: You need to configure this parameter when “programablekey.X.type” is phone
to 1, 59, 5, 14, 13, 15, 16,17,19,21,22 or 73.
String within 64 characters
long press softkey to enter programkey configure menu
For blf feature:
It configures the pickup code.
Note: It is only applicable when “programablekey.X.type” is phone to 59.
String within 64 characters
long press softkey to enter programkey configure menu
This feature provides 17 groups of new parameters for user to configure the programming hard key
such as key Redial/key Hold/key conference and so on.
Users can configure these keys for custom function such as Speed dial/DND/Forward and so on.
The *** in the table will be replaced by Key Name in the actual database.
➢ The feature can be configured by the following parameters in configuration file:
It configures key type for a specific programmable key.
0 - Not Used
1 - Speed Dial
3 - Do Not Disturb
4 - Directory
7 - Forward
To Next Page
Loading...
