Alcatel-Lucent Halo H3P - DHCP Options for IPv4 and IPv6

Copyright @ALE 2020 All Rights Reserved
14
Note: It works only if “LocalEnetcfgIpstack” is phone to IPv6, and "
LocalEnetcfgIpv6Mode " is phone to Static.
Permitted
Values
IPv6 Address
Default
Blank
Phone UI
Menu->Advanced (default password: 123456)Setting->Network->IP Config->IPv4
Settings-> Router
Parameter
DmEnetcfgDns1v6
config.<mac>.xml
Description
It configures the primary IPv6 DNS server.
Example:
DmEnetcfgDns1v6= 3036:1:1:c3c7:c11c:5447:23a6:256
Note: It works only if “LocalEnetcfgIpstack” is phone to IPv6, and "
LocalEnetcfgIpv6Mode " is phone to Static.
Permitted
Values
IPv6 Address
Default
Blank
Phone UI
Menu->Advanced (default password: 123456)Setting->Network->IP Config->IPv6
Settings-> DNS1
Parameter
DmEnetcfgDns2v6
config.<mac>.xml
Description
It configures the secondary IPv6 DNS server.
Example:
DmEnetcfgDns2v6= 3036:1:1:c3c7:c11c:5447:23a6:256
Note: It works only if “LocalEnetcfgIpstack” is phone to IPv6, and "
LocalEnetcfgIpv6Mode " is phone to Static.
Permitted
Values
IPv6 Address
Default
Blank
Phone UI
Menu->Advanced (default password: 123456)Setting->Network->IP Config->IPv6
Settings-> DNS2
If you change this parameter, the IP phone will reboot to make the change take effect.
The IP phone can obtain IPv4-related parameters in an IPv4 network via DHCP option.
Note: For more information on DHCP options, refer to RFC 2131 or RFC 2132.
Topics
DHCP Option 66/67, Option 43
DHCP Option 42
DHCP Option 12
DHCP Option 42
DHCP Option 67
DHCP Option 6
DHCP Option 132