In Halo R120 release, the IP phones support to configure DHCP option 132 to define 802.1Q
VLAN ID.
In Halo R120 release, the IP phones support to configure DHCP option 133 to define 802.1p
LAYER 2 Priority for SIP/RTP.
In Halo R120 release, the IP phones support to configure DHCP option 100 to define timezone.
The format of the POSIX specifier is <name><offset><dst name><dst offset><dstrule>
➢ name is the name of the timezone when not in daylight savings (eg GMT, PST, NZST)
➢ offset is the offset added to the local time to get UTC, specified as [+|-]hh[:mm[:ss]] (eg 0, 8,
-12)
➢ dst name is the name of the timezone when in daylight savings (eg BST, PDT, NZDT)
➢ dst offset is the offset added to the local time to get UTC during daylight savings, similarly
specified as [+|-]hh[:mm[:ss]]
Some examples:
➢ London: GMT0BST1,M3.5.0/1:00:00,M10.5.0/2:00:00
➢ Los Angeles: PST8PDT,M3.2.0/2:00:00,M11.1.0/2:00:00
➢ New Zealand: NZST-12NZDT,M9.5.0/2:00:00,M4.1.0/3:00:00
User can define the VCI by the below parameter in configuration file:
To Next Page
Loading...
