EasyManua.ls Logo

Alcatel-Lucent Halo H3P - Audio Codecs and PTime Settings

Alcatel-Lucent Halo H3P
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Copyright @ALE 2020 All Rights Reserved
51
25:Japan
The following table lists the parameters you can use to configure tones.
AudioToneCountry
config.<mac>.xml
It configures country standard for call progress tone.
0:UK
1:France
2:Germany
3:Italy
4:Spain
5:Dutch
6:Portugal
7:Canada
8:US
9:Hungary
10:Czec
11:Slovakia
12:Slovenia
13:Estonia
14:Poland
15:Lithuania
16:Latvia
17:Turkey
18:Greece
19:Russia
20:China(Mainland)
21:China(Hongkong)
22:China(Taiwan)
23:Thailand
24:Korea
25:Japan
0
Setting -> Audio -> Country Tone
CODEC is an abbreviation of Compress-Decompress, capable of coding or decoding a digital data
stream or signal by implementing an algorithm. The object of the algorithm is to represent the high-
fidelity audio signal with a minimum number of bits while retaining the quality. This can effectively
reduce the frame size and the bandwidth required for audio transmission.
The audio codec that the phone uses to establish a call should be supported by the SIP server.
When placing a call, the IP phone will offer the enabled audio codec list to the server and then use
the audio codec negotiated with the called party according to the priority.
Topics
Supported Audio Codecs
Audio Codecs Configuration
The following table summarizes the supported audio codecs on IP phones:
Codec
Algorithm
Reference
Bit Rate
Sample
Rate
Packetization
Time
G722
G722
RFC 3551
64 Kbps
16 Ksps
20ms

Related product manuals