Alcatel-Lucent Halo H3P - Call Management Features; Call Log and Dial Plan Configuration

Copyright @ALE 2020 All Rights Reserved
62
performs NAPTR query for the NAPTR pointer and transport protocol (UDP, TCP and TLS), the
SRV query on the record returned from the NAPTR for the target domain name
and the port number, and the A query for the IP addresses.
If an explicit port (except 0) is specified, A query will be performed only. If a server port is phone to
0 and the transport type is phone to DNS-NAPTR, NAPTR and SRV queries will be tried before
falling to A query. If no port is found through the DNS query, 5060 will be used.
Topics
SIP Server Name Resolution Configuration
The following table lists the parameters you can use to configure SIP server name resolution.
Parameter
SIPGroupXTransportMode
config.<MAC>.xml
Description
It configures the type of transport protocol.
Permitted
Values
0-Udp
1-Tcp
2-TLS
3-NAPTR. If no server port is given, the IP phone performs the DNS NAPTR and SRV
queries for the service type and port.
Default
0
Web UI
Account->Basic->Transport Mode
In Halo R120 release, call log display is optimized (enable/disable, display on types:
All/Missed/Placed Calls/Received Calls/Forwarded Calls)
All call logs are divided into All Calls/Missed Calls/Placed Calls/Received Calls/Forwarded Calls.
The five types of call log are displayed by five tabs in screen history, users can switch the tabs by
push left/right button.
Topics
Call Log Display
Call Log Configuration
You can access the call history information via phone user interface by the history button on
homepage.