Alcatel-Lucent Halo H3P - Page 84

Copyright @ALE 2020 All Rights Reserved
84
H3P/H3G: X=1~3
H6: X=1~4
Description
It triggers the no answer forward feature to on or off on a phone basis.
Note: It work only if “ForwardModeAccount” is phone to 1 (Custom).
Permitted
Values
0-Off
1-On, incoming calls are forwarded to the destination number (configured by the
parameter “ForwardNoReplyDestX”) after a period of ring time.
Default
0
Web UI
Features -> Forward->No Reply FWD->On/Off
Phone UI
Menu->Features->Call Forward->No reply Forward-> account ID->No Reply Forward
Parameter
ForwardNoReplyDestX
H3P/H3G: X=1~3
H6: X=1~4
config.<mac>.xml
Description
It configures the destination number of the no answer forward on a phone basis.
Note: It work only if “ForwardModeAccount” is phone to 1 (Custom).
Permitted
Values
String within 32 characters
Default
Blank
Web UI
Features -> Forward->No Reply FWD Phone Number
Phone UI
Menu->Features->Call Forward->No Reply Forward-> account ID->Forward To
Parameter
ForwardNoReplyOnCodeX
H3P/H3G: X=1~3
H6: X=1~4
config.<mac>.xml
Description
It configures the no answer forward on code to activate the server-side no answer
forward feature.
The IP phone will send the no answer forward on code and the pre-configured destination
number (configured by the parameter “ForwardNoReplyDestX”) to the server when you
activate no answer forward feature on a phone basis.
Example:
ForwardNoReplyOnCodeX = *52
Note: It work only if “ForwardModeAccount” is phone to 1 (Custom).
Permitted
Values
String within 32 characters
Default
Black
Web UI
Features -> Forward->On Code(under No Reply FWD)
Phone UI
Menu->Features->Call Forward->No Answer Forward-> account ID->On Code
Parameter
ForwardNoReplyOffCodeX
H3P/H3G: X=1~3
H6: X=1~4
config.<mac>.xml
Description
It configures the no answer forward off code to deactivate the server-side no answer
forward feature. The IP phone will send the no answer forward off code to the server
when you deactivate no answer forward feature on the IP phone.
Example:
ForwardNoReplyOffCodeX = *53
Note: It work only if “ForwardModeAccount” is phone to 1 (Custom).
Permitted
Values
String within 32 characters