Alcatel-Lucent Halo H3P - Page 98

Copyright @ALE 2020 All Rights Reserved
98
+9:30
Adelaide,Broken_Hill,Darwin
+10:00
Brisbane,Chuuk,Currie,DumontDUrville,Guam,Hobart,Lindeman,Melbourne,Port_
Moresby,Saipan,Sydney,Ust-Nera,Vladivostok
+10:30
Lord_Howe
+11:00
Bougainville,Efate,Guadalcanal,Kosrae,Macquarie,Magadan,Norfolk,Noumea,Po
hnpei,Sakhalin,Srednekolymsk
+12:00
Anadyr,Auckland,Fiji,Funafuti,Kamchatka,Kwajalein,Majuro,McMurdo,Nauru,Tara
wa,Wake,Wallis
+12:45
Chatham
+13:00
Apia,Enderbury,Fakaofo,Tongatapu
+14:00
Kiritimati
Topic
TimeZone Configuration
The following table lists the parameters you can use to configure the TimeZone.
Parameter
DmAdmcfgTimeZoneUtoffphone
config.<mac>.xml
Description
It configures TimeZone.
Permitted
Values
CHOICE
Default
0
Web UI
Setting->Time&Date
You can phone an NTP time server for the desired area as required. The NTP time server address
can be offered by the DHCP server or configured manually.
Topic
NTP Configuration
The following table lists the parameters you can use to configure the NTP.
Parameter
DmEnetcfgSntp
config.<mac>.xml
Description
It configures the IP address or the domain name of the NTP server .
The IP phone will obtain the current time and date from the NTP server
Permitted
Values
IP_DOMAIN
Default
0.pool.ntp.org
Web UI
Setting->Time&Date->SNTP Address
Parameter
DmEnetcfgSntp2
config.<mac>.xml
Description
It configures the IP address or the domain name of the NTP server2 .
The IP phone will obtain the current time and date from the NTP server2
Permitted
Values
IP_DOMAIN
Default
time.nist.gov