Alcatel-Lucent OmniPCX Office User Guide

Room status
15
5
 Manual or automatic switch:
This feature is used to specify if the rooms concerned (on the “rooms” menu) switch automatically or manually into “not cleaned”
status.
In the table below, you can see the codes you have assigned to different problems indicated in room status:
“Hotel” programmed
key
manual switch
automatic switch
ROOM STATUS YOUR CODE
ROOM STATUS prefix: 88
Room cleaned 0
Room not cleaned 1
Problem of:
Problem of:
Problem of:
Problem of:
Problem of:
Problem of:
Problem of:
Problem of:
Cancelling the problem 000
Hotel
Status
Global
Now
OR
Time
2
6
5
3
ab c
def
jkl
m
no
OR
Clear

Alcatel-Lucent OmniPCX Office Specifications

General

VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Humidity	10% to 90% non-condensing
Type	IP PBX
Maximum Trunks	Up to 60
Voice codecs	G.711, G.729
Network Interfaces	10/100 Ethernet
Weight	Varies depending on the model/configuration