Getting to know your telephone
4
Handset
Socket for connecting headphones or a
Hands-free / Loudspeaker unit
Audio keys
Hang-up key:
to terminate a call.
Hands-free/Loudspeaker Key:
to make or answer a call without lifting the receiver.
• Lit in hands-free mode or headset mode (short press).
• Flashing in loudspeaker mode (long press).
Intercom/Mute key:
• During a conversation: press this key so that your correspondent can no longer hear you.
• Terminal idle: press this key to answer calls automatically without picking up the receiver.
To adjust the loudspeaker or handset volume up or down
Room terminal icons
1st segment 2nd segment 3rd segment
Lit
Room taken Terminal busy Room not cleaned
Not lit
Room free Terminal free Room cleaned
Flashing
Wake-up alarm problem Terminal ringing* Room problem
Indicator light
• Flashing green: incoming call.
• Flashing red: alarm.
Alphabetic keypad
Display and display keys
Contains several lines and pages providing information on calls and the functions accessible via the 10 keys associated with the words on the
screen.
Transfer icon:
pressing the key next to this icon allows you to program or change the transfer function.
Headset connected.
Appointment programmed.
Silent mode activated.
Telephone locked.
Display keys:
pressing a display key activates the function shown associated with it on the screen.
Navigation
Welcome screens
OK key:
used to validate your choices and options while programming or configuring.
Left-right navigator:
used to move from one page to another.
Up-down navigator:
used to scroll through the content of a page.
Back/Exit key:
to return to previous menu (short press) or return to first screen (long press) ; during a conversation,
provides access to welcome screens (Menu, Info, ...) and to return to the conversation icon screens.
Menu page:
contains all functions and applications accessible via the keys associated with
the words on the screen.
Perso page:
contains call line keys (allowing supervision of calls) and programmable call
keys.
Info page:
contains information on the telephone and the status of its functions: name, telephone number, number of messages, acti-
vation of transfer function, appointment reminder, etc.
Call display
Incoming call.
Call in progress or outgoing call.
Call on hold*.
If you get two calls at the same time, you can switch from one call
to the other by pressing the display key associated with each call.
Left-right navigator:
used to check calls.
OK key:
used to answer the call checked.
Function keys and programmable keys
Guide key:
used to obtain information on functions of the 'menu' page and to program key of the 'perso' page.
Messaging key to access various mail services:
if the key flashes, a new voice message or a new text message has been received.
'Redial' key:
to access the 'Redial' function.
Programmable key (F1 and F2 keys):
lit when the function associated with the key is activated.
Some other keys have been programmed by your technician for your own convenience:
key must be programmed by your technician to access a service.
Adjust the tilt of the screen
To Next Page
Loading...
Need help?
General
