Need help?Do you have a question about the Alcatel-Lucent 9130 BSC Evolution and is the answer not in the manual?
General| Brand | Alcatel-Lucent |
|---|---|
| Model | 9130 BSC Evolution |
| Category | Server |
| Language | English |
Describes how to replace units, cables, install, configure and change software.
Details description improvements and updates across different editions of the handbook.
Specifies the intended audience for the maintenance handbook.
Lists the basic understanding required for using the handbook.
Shows the front view of the 9130 BSC Evolution hardware, including subracks and boards.
Illustrates the network connections and interactions of the 9130 BSC Evolution.
Details the mapping of boards, areas, slots, and SBLs within the ATCA shelf.
Outlines critical safety guidelines for working with powered equipment to prevent injury.
Details precautions and tools necessary to prevent electrostatic discharge damage.
Provides preliminary information and system impact considerations before performing maintenance.
Covers fan tray and air filter maintenance procedures, including replacement and cleaning.
Covers front RITs and fillers replacement, including insertion tips and specific board procedures.
Covers rear RITs and fillers replacement, including specific board procedures.
Provides instructions for replacing the battery on JBXOMCP and JBXCCP boards.
Provides system impact and lists the components equipped in the LIU subrack.
Details the replacement of LIU boards, noting traffic reduction and impedance considerations.
Covers the procedure for replacing JBXPEM modules, including PDU breaker mapping.
Details the procedure for replacing JBXMUX boards, including restrictions and notices.
Covers the procedure for replacing LIU front fillers (JBXDUM).
Illustrates the rack intervention levels for the 9130 BSC Evolution, detailing cable connection considerations.
Lists and details the cables used within the ATCA subrack, including part numbers and connections.
Provides a list of cables for the LIU subrack, detailing links between LIU and ATCA.
Guides on how to modify the SNMP Community String name on the active OMCP.
Details the procedure for performing software and hardware diagnosis on OMCP boards using a script.
Covers IP assignment rules, subnetwork addresses, and configuration changes for LAN solutions.
Details the steps for collecting, backing up, restoring, and stopping traces and logs.
To Next Page