Alcatel-Lucent 9130 BSC Evolution - Figure 10: Board Handle - Remove or Insert Board; Figure 9: ATCA Front Board Handles - Second Step to Remove a Board

3 Maintain the ATCA Subrack
3.5.1.2 Second Step to Remove a Board
The following figure shows the second step to perform when removing a board.
Figure 9: ATCA Front Board Handles - Second Step to Remove a Board
3.5.1.3 Remove or Insert Board
During boards insertion/removal do not push/pull strongly on handles,
but on the front plate.
The following figure shows how to open or close the handle.
Figure 10: Board Handle - Remove or Insert Board
3BK 21281 AAAA PCZZA Ed.13 29 / 90