Alcatel-Lucent 9130 BSC Evolution - Modify Community String Name

6 Software Procedures
6.1 Modify Community String Name
To modify Community String name:
1. Connect on active OMCP using terminal
telnet 172.17.y.x
Where:
y is 3 for Shelf 3
y is 4 for Shelf 4
x is 30 for OMCP1
x is 40 for OMCP2
2. Type the username:
root
and the password:
alcatel
3. In the terminal window 172.17.y.x corresponding to active OMCP, type
the following command:
cd /usr/local/bin/
./mpRumSetSnmpPasswd <OLD SNMP PASSWD> <NEW SNMP
PASSWD 1> <NEW SNMP PASSWD 2>
This command modifies the community string name in the snmpd.local.conf
configuration file.
The <OLD SNMP PASSWD> must be known.
The <NEW SNMP PASSWD 1> must be egual to <NEW SNMP PASSWD
2>.
The SNMP Password is also known as Community String.
The Community String must be the same as the one defined at OMCR side.
4. Close the terminal window 172.17.y.x.
78 / 90 3BK 21281 AAAA PCZZA Ed.13