EasyManua.ls Logo

Alcatel-Lucent OmniPCX Office

Alcatel-Lucent OmniPCX Office
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Type Message Location Additional Information Action
35 PS-BOOST BOARD FAULT
A PS-BOOST board problem
has been detected
CPU (80) INFO 0 = type of error (1 = more
than one boost present or boost in
a small rack; 2 = no boost nor ex-
ternal feeding; 3 = external power
loss; 4 = external power recovery)
36 The status of the server certific-
ate has changed
INFO 0
- 1: Certificate OK
- 2: Incomplete names list
- 3: Expired certificate
- 4: Expired authority
INFO1 = Type of certificate
- 0: Self-signed
- 1: CA-signed
INFO2 = Trigger
- 0: Reset
- 1: Webdiag
- 2: Config
- 3: Daily check
39 R_PASSWORD_AUTHENTICA
TION_LOCKED
User password authentication is
currently locked for Remote/Loc-
al access to WSAPI and VMU
Board loca-
tion
INFO 0 = Reason for lock
- 01 = Local access to VMU
- 02 = Remote access to VMU
- 03 = Local access to WSAPI
- 04 = Remote access to WSAPI
INFO 1 = Count of lock
INFO 2 = First byte of EDN
INFO 3 = Second byte of EDN
40 R_ANO_EMERGENCY_CONFI
G
No device has been configured
to receive emergency call noti-
fication
41 R_PASSWORD_AUTHENTICA
TION_UNLOCKED
User password authentication is
currently unlocked for Remote/
Local access to WSAPI and
VMU
Board loca-
tion
INFO 0 and 1 = Not used
INFO 2 = First byte of EDN
INFO 3 = Second byte of EDN
44 R_ARP_SPOOF_INFO
ARP spoofing detected. Multiple
ARP reply received within lock-
time period.
Board loca-
tion
INFO 0 to 3 = IP address of the tar-
get, eg : C0 A8 5C 16 for
192.168.92.22
45 R_MGTSRV_LOCK
Access to system management
is locked due to 6 consecutive
authentication failures with in 5
minutes.
Board loca-
tion
% *
 ! "#$ ! % $& !     
31/62

Other manuals for Alcatel-Lucent OmniPCX Office

Related product manuals