Alcatel-Lucent OmniPCX Office User Manual

6.5.1 Types of board (INFO 0 of messages 100, 101, and 244)
- Boards R1.0 and R1.1
82H : integrated voice server
9EH : SLI board
A0H : UAI board
A1H : PRA board = E1
A2H : PRA board = DLE1
A3H : PRA board = T1
A4H : PRA board = DASS2
A7H : virtual XRA board
B0h : main PowerCPU EE board
B1H : MIX board
B2H : BRA board
B3H : LanX board
96h : ATA board (Analog lines)
- Additional boards R2.0
B4h : APA board (Analog lines)
B5h : T1 CAS board
B6h : LanX-1 board
B7h : UAI-1 board
B9h : DDI board
- Additional boards R2.1
A5h : PRA board = PCM
B9h : SLI-1 board (legerity)
BAh : SLI-1 board (ST)
- Additional boards R3.0
BBh : Media virtual board
BCh : LanX-2 board
BDh : MIX-1 board (Legerity)
BEh : MIX-1 board (St)
- Additional boards R3.1
BFh : AMIX-1 board (Legerity)
C0h : AMIX-1 board (St)
- Additional boards R8.0
C1h : SLI-2 board
- Additional boards R9.2
C2h : MIX-2 board
C3h : BRA-2 board
6.5.2 Types of terminal (INFO 0 of messages 111 and 112)
Types of terminal Value of INFO 0 in message 111 and 112
% *
 ! "#$ ! % $& !     
43/62

Alcatel-Lucent OmniPCX Office Specifications

General

VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Humidity	10% to 90% non-condensing
Type	IP PBX
Maximum Trunks	Up to 60
Voice codecs	G.711, G.729
Network Interfaces	10/100 Ethernet
Weight	Varies depending on the model/configuration