Chapter
6
Start-Up
6.1 System startup from a phone set
You can start-up the system using a Premium DeskPhone (8038 Premium DeskPhone/8058s Premium
DeskPhone, 8039 Premium DeskPhone, 8068 Premium DeskPhone/8068s Premium DeskPhone and
8078s Premium DeskPhone) set.
The phone set used needs to be defined as the operator phone set, that is the first phone set
connected to the system.
A start-up session is started automatically when the system is turned on for the first time. Follow this
start-up session to enter the data required to operate the system.
The procedures below show the 8038 Premium DeskPhone/8058s Premium DeskPhone, 8039
Premium DeskPhone, 8068 Premium DeskPhone/8068s Premium DeskPhone or 8078s Premium
DeskPhoneinterface.
In order to facilitate the first start-up, it is recommended that you have the following information
available:
• The number of your installation (international country prefix, national prefix, etc.).
• Basic metering unit value
• The ranges of numbers attributed by the network operator to the direct dial numbers (DDI) of the
terminals in your installation.
6.1.1 General dynamic keys
Previous
Return to the previous menu
Next
Go to the next menu
Delete the last character
Cancel
Cancel
Choice
Move between the various options
from those offered
OK
Validate an entry
Scroll up, down, left or right on the display
6.1.1.1 First power-up
Go on
3EH21123USAA - Ed. 01 - April 2017 - Installation Manual 169/207
To Next Page
Loading...
