• Modify the user name in the corresponding field and click Modify.
• Double-click the user in the list to open the User dialog box.
• Click on IP/SIP, go to SIP parameters tab to consult the SIP password.
4.4.3.1.2.6 Displaying SIP Connection Current Status
This feature allows the display of SIP connection status.
To display SIP connection status:
1. In OMC, go to Users/Base stations List > Details.
2. Read the SIP connection status (under the terminal's physical status).
The following table lists the different displayed status.
Displayed Status Meaning
Set not connected SIP phone disconnected from network / No SIP
registration request from the phone
SIP registration KO SIP registration request from SIP Phone rejec-
ted by OXO Connect
Set unregistered SIP phone unregistered from OXO Connect
SIP registration OK SIP phone connected and successfully regis-
tered to OXO Connect
4.4.3.1.2.7 Entering the SIP password through local MMI
For static and dynamic initialization, enter the SIP password through MMI.
4.4.3.1.3 Upgrading the software
The 4135 IP Conference Phone set software is automatically upgraded during OXO Connect software
upgrade  (there  is  no  specific  option  to  select  in  the  OMC-Software  Download  window:  refer  to  the
section Downloading the Software in document [11]).
The 4135 IP Conference Phone set software can also be upgraded manually through the MMI.
4.4.4 Generic SIP Phones
4.4.4.1 Commissioning
4.4.4.1.1 Overview
This module presents all the actions required for commissioning generic SIP sets.
The  List  of  supported  SIP  Phones  is  available  on  the  Alcatel-Lucent  Applications  Partner  Program
(AAPP) web site.
4.4.4.1.2 Commissioning Generic SIP Sets
This section describes how to commission a generic SIP Set.
The following operations must be performed:
1. Configure the user in OMC, refer to Configuring the User in OMC on page 94
2. Connect the set, refer to Connecting the Set on page 94 and switch it on
3. Configure the generic SIP set, refer to Configuring the generic SIP set on page 94, or configure the
OXO Connect DHCP server, refer to Configuring OXO Connect DHCP server on page 95.
Chapter 
4
Installation and Cabling
3EH21123USAA - Ed. 01  - April 2017 - Installation Manual 93/207