Alcatel 3C - Page 34

65 66
• When finished, touch and then Save.
To enable data roaming
• Touch Settings > Network & connection > Cellular
networks.
• Mark Data roaming checkbox.
• When data roaming is disabled, you can still perform
data exchange with a Wi-Fi connection (refer to
"6.1.2 Wi-Fi").
To set preferred network mode
• Touch Settings > Network & connection> Cellular
networks > Preferred network type.
6.1.2 Wi-Fi
You can connect to the internet when your phone is
within range of a wireless network. Wi-Fi can be used on
your phone even without a SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
• Touch Settings > Network & connection > Wi-Fi.
• Turn on .
• Once Wi-Fi is turned on, detected Wi-Fi networks
are listed.
• Touch a Wi-Fi network to connect to it. If the network
you selected is secured, you are required to enter a
password or other credentials (you may contact the
network operator for details). When finished, touch
CONNECT.
To add a Wi-Fi network
When Wi-Fi is on, you may add new Wi-Fi networks
according to your preference.
• Touch Settings > Network & connection > Wi-Fi.
• Touch Add network.
• Enter the name of the network and any required
network information.
• Touch SAVE.
To forget a Wi-Fi network
The following steps prevent automatic connections to
networks which you no longer wish to use.
• Turn on Wi-Fi, if it’s not already on.
• On the Wi-Fi screen, touch the name of the saved
network.
• Touch FORGET in the dialog that opens.