Alcatel GO FLIP 4 Quick Start Guide

6
Your device only supports Nano SIM
cards. To avoid damage to your device,
do not attempt to insert any other SIM
types.
Battery
To optimize battery performance, be sure to
fully charge your device before using it for
the first time.
Charging the device
Insert the small end of the charging cable into
the charge port as shown and connect the
charger to a power outlet.
To reduce power consumption and
energy waste, disconnect your charger
when the battery is fully charged, and
switch off Wi-Fi, Bluetooth and other
wireless connections when they are
not in use.

Alcatel GO FLIP 4 Specifications

General

Resolution	320 x 240 pixels
RAM	512 MB
Internal Storage	4 GB
Expandable Storage	microSD up to 32 GB
Rear Camera	2 MP
Battery	1350 mAh
Operating System	KaiOS
Connectivity	4G LTE, Wi-Fi, Bluetooth 4.2
Display	2.8 inches
Weight	4.16 oz (118 g)