Alcatel GO FLIP 4 Quick Start Guide

7
Optimize Battery Life
To optimize battery life, adjust your screen
brightness and display timeout.
1. Adjusting brightness level: Lowering your
screen brightness level can optimize your
battery level. To adjust the brightness
level, from the Home screen, press the
Center Soft Key
, select Settings >
Personalization > Display > Brightness. To
lower the brightness level, move the wheel
to the left.
2. Power saving mode: Power saving mode
minimizes battery usage to extend battery
life. To explore power management
options, from the Home screen, press the
Center Soft Key
, select Settings >
Device > Battery > Power saving mode.
Then select ON to activate.
3. Adjust screen timeout: Sleep mode
is a low power mode function and it
significantly saves your battery power.
Lower the amount of time your device
stays on after you stop using it to optimize
your battery level. To do so, from the
Home screen, press the Center Soft Key
, select Settings > Personalization
> Display > Screen timeout and select
screen timeout duration.

Alcatel GO FLIP 4 Specifications

General

Resolution	320 x 240 pixels
RAM	512 MB
Internal Storage	4 GB
Expandable Storage	microSD up to 32 GB
Rear Camera	2 MP
Battery	1350 mAh
Operating System	KaiOS
Connectivity	4G LTE, Wi-Fi, Bluetooth 4.2
Display	2.8 inches
Weight	4.16 oz (118 g)