Name: Alcatel LINKZONE 2
Brand: Alcatel
Rating: 4 (1 reviews)

To Next Page

To Previous Page

OS supported

Windows (32 bit & 64 bit) 7/8/8.1/10

Mac OS X 10.6 to 10.11 with the latest upgrade

Connect your Wi-Fi device to your

Mobile Hotspot

1. Power on your mobile hotspot.

2. On your computer or other Wi-Fi enabled device, search for

available Wi-Fi networks and select network name (SSID)

located on the label underneath the mobile hotspot baery.

Note: Wi-Fi name (SSID) and Wi-Fi Password is located on

the label underneath the mobile hotspot baery.

• From a Windows PC: Le-click Wireless Network

Connecon on the task bar to view available networks.

Choose the SSID from the list of available networks .

• From a Mac computer: Select System Preferences ->

Network -> Airport. Click Advanced to choose SSID from

the list of available networks.

• From an iOS device: Sengs -> Wi-Fi. Choose SSID from

the list of available networks.

• From an Android device: Sengs -> Wi-Fi sengs. Choose

the SSID from the list of available networks.

3. Enter password located on the label underneath the mobile

hotspot baery and click OK.

Use the WPS

If your Wi-Fi device supports WPS, you do not have to input the

password manually aer WPS connecon has been established.

Please follow the following steps:

1. Power on your Mobile Hotspot and enable the Wi-Fi

funcon.

2. Press and hold the WPS key on your device for 3 seconds

to start the Wi-Fi Protected Setup authencaon process.

Questions and Answers:

Need help?

Do you have a question about the Alcatel LINKZONE 2 and is the answer not in the manual?

Alcatel LINKZONE 2 Specifications

General