Alcatel MK20X - ESD Safety; Disassembly tool; Disassembly process

L2 Repair Document TCL Communication Ltd.
Rev.
MK20 Level 2 Repair Document
Page
1.0
11/23
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
5 Disassembly and assembly MK20
5.1 ESD Safety
Please wear static loop or static glove
5.2 Disassembly tool
You may use the following tools during the disassembly and reassembly procedure:
5.3 Disassembly process
The steps of disassembly MK20 are as below.
Plastic Flake
Tweezers
Screwdriver
(TORX6)
Pry bar
Hot wind gun
Soldering iron