Service centre • Allows you to enter or change the address of
the server your phone will connect to.
Gateway • Allows you to enter or change the IP address of
address the server’s gateway.
Gateway port • Allows you to enter or change the Port number
of the server’s gateway.
7.9 SMS CB (Cell Broadcast)
These are messages broadcast over the network (weather forecast, traffic
conditions, etc..).
Automatic • Activate /deactivate the automatic display of the
reception programmed SMS CB.
CB code list • List of SMS CB codes for messages you want to
view (“Create” or “CB code list”).
52
Network settings
Network • Allows you to choose a data profile from the
Account ones you have set (see page 66 for complete
information on how to configure or modify a
data profile). This profile and the parameters it
features will then be used for connection.
Bearer • This menu allows you to select the type of
network used when launching a connection.
-“GPRS first”: Your mobile will first try to
connect to the GPRS network, then to the
GSM network if the GPRS network isn’t
available when connecting.
-“GPRS”: Your mobile will only use the GPRS
network for connections.
-“GSM”: Your mobile will only use the GSM
network for connections.
If you select GPRS first, you must configure both the GSM and
GPRS settings (see page 66).
51
To Next Page
Loading...
