Symbol Cause Solution
Please send back to the local distributor.
Please send back to the local distributor.
The pressure that the
sensor sensing is over
the limit
The demarcation is incor-
rect or the device has not
been demarcated
Problem Check This Solution
Replace new batteries
Installation batteries correctly
Keep the body peaceful
Keep quite when measure
Insert plug into the air socket tightly
Check the battery power
Check the polarity position
Whether the plug is inserted
Change a new cuff
Whether the plug is broken or leak
Wrap the cuff tightly
Change a new cuff
Whether the cuff wrap too loose
Whether the cuff broken
Please contact the distributor if you can’t solve the problem. Do not disassemble the unit by yourself.
Cuff leak
Whether move the arm when inflate
Check if chatting when measured
No power
No inflation
Error and stop
working
Trouble Shooting
24
To Next Page
Loading...