Alcedo B21 - Care and Maintenance; Accuracy Test Recommendations

27
Note: No power is taken from the batteries
while the AC adapter is connected to the moni-
tor. If electrical power is interrupted, (e.g., by ac-
cidental removal of the AC adapter from the out-
let) the monitor must be reset by removing the
plug from the socket and reinserting the AC
adapter connection.
Sensitive measuring devices must be checked
for accuracy from time to time. We recommend a
periodical inspection of your unit by an autho-
rized dealer every 1 year. Please turn to local dis-
tributor or the manufacturer.
Accuracy Test
Wash hands after each time measurement.
If one device is used by different patients,
wash hands before and after each use.
Do not expose the device to either extreme
temperatures, humidity, dust or direct sun-
light.
The cuff contains a sensitive air-tight bubble.
Handle this cuff carefully and avoid all types
of stress through twisting or buckling.
Clean the device with a soft, dry cloth. Do not
use gas, thinners or similar solvents. Spots on
the cuff can be removed carefully with a damp
cloth and soapsuds. The cuff with bladder
must not be washed in a dishwasher, clothes
washer, or submerged in water.
Handle the tube carefully. Do not pull on it. Do
not allow the tubing to kink and keep it away
from sharp edges.
Do not drop the monitor or treat it roughly in
any way. Avoid strong vibrations.
Never open the monitor! This invalidates the
manufacturer’s warranty.
Batteries and electronic instruments must be
disposed of in accordance with the locally ap-
plicable regulations, not with domestic waste.
Care and Maintenance