30
EMC Declaration
This product needs special precautions regarding EMC and needs to be installed and put into service according
to the EMC information provided, and this unit can be affected by portable and mobile RF communications
equipment.
Do not use a mobile phone or other devices that emit electromagnetic fields, near the unit. This may result in in-
correct operation of the unit.
Caution: This unit has been thoroughly tested and inspected to assure proper performance and operation.
Caution: This machine should not be used adjacent to or stacked with other equipment and that if adjacent or
stacked use is necessary. This machine should be observed to verify normal operation in the configuration in
which it will be used.
1.
2.
3.
4.
Guidance and manufacture’s declaration – electromagnetic emission
The device is intended for use in the electromagnetic environment specified below. The customer of the
user of the device should assure that it is used in such an environment.
The device use RF energy only for its internal function. There-
fore, its RF emissions are very low and are not likely to cause
any interference in nearby electronic equipment.
Emission test
RF emissions CISPR 11
RF emissions CISPR 11
Group 1
Class B
Harmonic emissions
IEC 61000-3-2
The device is suitable for use in all establishments, including
domestic establishments other than domestic and those di-
rectly connected to the public low-voltage power supply net-
work that supplies buildings used for domestic purposes.
Not applicable
Not applicable
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Compliance Electromagnetic environment – guidance
To Next Page
Loading...