32
Guidance and manufacture’s declaration – electromagnetic immunity
30 A/m
50/60 Hz
Guidance and manufacture’s declaration – electromagnetic immunity
The device is intended for use in the electromagnetic environment specified below. The customer or the
user of device should assure that it is used in such an environment.
Portable and mobile RF communications
equipment should be used no closer to any
part of the device, including cables, than
the recommended separation distance cal-
culated from the equation applicable to the
frequency of the transmitter.
Immunity test
Conducted RF
IEC 61000-4-6
3 Vrms
150 kHz to 80 MHz
3 V RMS outside the
ISM band, 6 V RMS
in the ISM and
amateur bands
80% AM at 1 kHz
Recommended separation distance
d=0.35 √p
d=1.2 √p
Not applicable
IEC 60601 test level Compliance level Electromagnetic environment - guidance
Power frequency
(50Hz/60Hz)
magnetic field
IEC 61000-4-8
NOTE: UT is the a.c. mains voltage prior to application of the test level.
30 A/m
50/60 Hz
Power frequency magnetic fields should
be at levels characteristic of a typical lo-
cation in a typical commercial or hospital
environment.
To Next Page
Loading...