Why does my AlcoSense Ultra Test Equipment say 'Calibration Expired'?
If your AlcoSense Test Equipment displays 'Calibration Expired' or 'Calibration Due', it means the 12-month calibration period is either approaching its end or has already passed. To resolve this, you should contact us to arrange for the unit's recalibration.
Why do I get different results on my AlcoSense Test Equipment?
The most accurate reading on your AlcoSense Test Equipment is the first one. When performing subsequent tests within a few minutes, the alcohol levels in your lungs may not have stabilized after the initial test. Therefore, it's recommended to use the breathalyzer at least 90 minutes after drinking, or ideally, the following morning.
What to do if my AlcoSense Test Equipment says 'Saturation Lockdown'?
If your AlcoSense Test Equipment displays 'Saturation Lockdown', it indicates an abnormally high level of alcohol was detected. After the specified lockdown period concludes, your unit should resume normal operation.
Why does my AlcoSense Test Equipment show positive if I haven't drunk alcohol?
A positive reading on your AlcoSense Test Equipment, despite not consuming alcohol, could be due to testing within 10 minutes of eating strong foods, using dental products, chewing gum, smoking, or the body releasing acetone/ketones during the metabolism of acetoacetic acid. If you experience this problem please call us.
What to do if AlcoSense Test Equipment gives strange results after many tests?
If you've performed numerous tests in quick succession and received an unusual result on your AlcoSense Test Equipment, it could be due to a build-up of breath condensation inside the breathalyzer. This can cause temporary inaccuracies until the condensation evaporates. To prevent this, allow a minimum of 3 minutes between tests, do not perform more than 10 tests in one hour, and no more than 30 tests in 24 hours. Always use a new mouthpiece for each test.
Explains the function of the three buttons and how they interact with the device's screen interface.
Explains how the device estimates time to sobriety and how to set a retest alarm.
Information on how to get help, including contact numbers and online resources.
Explains the necessity of periodic re-calibration for accuracy and how to arrange it.
Information on professional servicing options to maintain the breathalyser's performance.
Explains the meaning of calibration expiry messages and what action to take.
Lists the technical specifications of the AlcoSense Ultra, including reading range, accuracy, and operating conditions.
Outlines the terms and conditions of the product's limited warranty, coverage, and claim procedures.
General| Type | Breathalyzer |
|---|---|
| Display | LCD |
| Weight | 150 g |
| Warm-up Time | 10 seconds |
| Power Source | Rechargeable battery |
| Sensor Technology | Fuel Cell |
| Detection Range | 0.00 to 0.40% BAC |
To Next Page
