aldes InspirAIR H190-TRG User Manual

INSTALLATION, OPERATIONS & MAINTENANCE MANUAL
InspirAIR™ Home
STANDARD RESIDENTIAL
HEAT & ENERGY RECOVERY VENTILATORS
FOR MODELS:
H95-TRG • H110-TF • H150-TRG • H190-TRG
E110-TF • E150-TRG • E190-TRG
Installing Contractor Telephone / Contact
Serial Number Installation Date
TO BE COMPLETED BY CONTRACTOR AFTER INSTALLATION
Model
Installer: Leave this manual for the homeowner
Meets Standards:
C22.2 no 113 and UL 1812

aldes InspirAIR H190-TRG Specifications

General

Noise Level	27 dBA @ 60 CFM
Dimensions	22.8" H x 22.8" W x 9.8" D
Supply Voltage	120V
Voltage	120V
Frequency	60 Hz

Summary

Precautions and Guidelines

General Safety Warnings and Cautions

Covers safety advice, operational recommendations, and general warnings.

Ducting Configurations Overview

Introduction to various ducting setups for HRV/ERVs.

Fully Ducted System Configuration

Description of the best configuration for ventilation effectiveness.

Partially Ducted System Configuration

Description of a partially integrated ducting setup.

Indirect Ducting Configuration

Description of an indirect ducting setup.

Fully Integrated System Configuration

Description of a fully integrated ducting setup.

Locating Components and Ducting Basics

Unit location, ports, ducting materials, and connecting ducts.

Vent Hood Locations

Exhaust and Supply Air Grille Placement

Installation - Unit Setup and Wiring

What's Included and Mounting the Unit

Drain Connections (HRV Models)

Interlocking with Air-Handler/Furnace

How to connect and interlock the HRV/ERV with HVAC systems.

Enabling Slave Mode

Controller Installation

Digital Multifunction Control Installation

Humidity Control Installation

Timer Installation

Speed and Mode Control Installation

Measuring and Balancing Airflow

Measure and Balance Overview

Door-Port Balancing Procedure

ZRT VentZone® Balancing

Maintenance

General Maintenance

Routine cleaning and checks for the HRV/ERV unit.