Need help?Do you have a question about the aldes EasyVEC C4 and is the answer not in the manual?
General| Type | Centrifugal fan |
|---|---|
| Airflow | Up to 400 m³/h |
| Noise level | 35 dB(A) |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Application | Residential and commercial ventilation |
| Motor Type | AC |
Lists associated documents and compliance certifications for the product.
Illustrates installation configurations for different unit sizes and types.
Provides detailed physical dimensions and enclosure specifications for various models.
Details necessary tools and optional accessories required for installation.
Outlines essential safety precautions during handling, installation, and operation.
Advises on structural support and vibration dampening before mounting the unit.
Explains how to connect air ducts, including site considerations and flexibility.
Specifies electrical protection requirements like breakers and RCDs for safe operation.
Details the step-by-step procedure for connecting electrical wiring to the unit.
Explains the installation and function of the static 80 Pa pressure switch.
Covers activation operations for specific EasyVEC® C4 Standard models.
Presents performance curves and corresponding potentiometer settings for Standard models.
Details manual controller adjustment for the Standard 4000 model.
Outlines activation steps for PRO, ULTRA, and ULTIMATE models.
Explains the function of each button on the unit's interface.
Guides through the initial setup and language selection process.
Describes the different operating modes available for PRO/ULTRA/ULTIMATE models.
Details configuration steps for the EasyVEC® C4 PRO models.
Guides the selection of operating modes like Regulated or Constant Pressure.
Explains how to input the desired pressure setpoint for the unit.
Covers access to and use of the Expert mode for advanced settings.
Details configuration steps for the EasyVEC® C4 ULTRA and ULTIMATE models.
Guides the selection of operating modes like Regulated or Constant Pressure.
Explains setting minimum and maximum pressures for regulated mode.
Details advanced configuration options within the Expert mode.
Describes how to adjust screen display, language, and other settings.
Explains how to view and acknowledge error logs on the interface.
Details how to wake up the interface from its power-saving mode.
Guides on performing a factory reset of the unit's settings.
Specifies the operating temperature and humidity ranges for the interface.
Provides a diagram of the electronic board for PRO/ULTRA/ULTIMATE models.
Illustrates the wiring of the electronic board for the Standard 4000 model.
Lists common problems, their causes, and troubleshooting steps.
Provides general Modbus communication parameters for PRO/ULTRA/ULTIME versions.
Explains how to use Modbus communication equipment with the unit.
Details the procedure for setting up the unit within a BMS installation.
Introduces the Aldes Connect service and outlines general safety guidelines.
Describes the Aldes Connect Pro hardware and its compatibility with EasyVEC® models.
Guides on registering the product and accessing the Aldes Connect service.
Details the registration process with pre-registration by the installer.
Details the registration process without pre-registration by the installer.
Outlines Aldes' liability limitations regarding Sigfox network and service.
Specifies the warranty period for the equipment and the telecommunication subscription.
Explains customer agreement to the general terms of use for the service.
Outlines data protection rights for users and customers regarding personal data.
To Next Page
