aldes InspirAIR E150-TRG User Manual

INSTALLATION, OPERATIONS & MAINTENANCE MANUAL
InspirAIR™ Home
STANDARD RESIDENTIAL
HEAT & ENERGY RECOVERY VENTILATORS
FOR MODELS:
H95-TRG • H110-TF • H150-TRG • H190-TRG
E110-TF • E150-TRG • E190-TRG
Installing Contractor Telephone / Contact
Serial Number Installation Date
TO BE COMPLETED BY CONTRACTOR AFTER INSTALLATION
Model
Installer: Leave this manual for the homeowner
Meets Standards:
C22.2 no 113 and UL 1812

aldes InspirAIR E150-TRG Specifications

General

Airflow Rate	150 CFM
Noise Level	< 48 dBA
Voltage	120 V
Frequency	60 Hz
Supply Voltage	120 V

Summary

PRECAUTIONS & GUIDELINES

Connecting the Ducts

INSTALLATION

Mounting the Unit

Instructions for physically installing the ventilation unit, either suspended or wall-mounted.

Drain Connections (HRV Models)

How to properly connect condensate drains to prevent issues and odors.

Interlocking HRV/ERV to Air-Handler/Furnace Blower

Connecting the unit to existing HVAC systems for integrated operation.

Unit Wiring

Details on electrical connections and wiring configurations for the unit.

Enabling Slave Mode

Steps to configure the unit to operate under external control (slave mode).

Field Wiring

General guidelines and recommendations for electrical field wiring.

Installing Digital Multifunction Control (P/N 611242-FC)

Step-by-step guide for installing the digital humidity controller.

Installing Humidity Control (P/N 611224)

Detailed installation instructions for the wall-mounted humidity control unit.

Installing 20/40/60 Minute Timer (P/N 611228)

Installing Speed or Mode Control (P/N 611229/611230)

ZRT VentZone® Systems

Installing Zone Register Terminal

MEASURING & BALANCING AIRFLOW

Measure and Balance

Door-Port Balancing

Method for measuring and adjusting airflow using the unit's door ports.

Balancing Airflow and Adjusting Motor Speed

Adjusting fan speeds via the FLEXControl interface for optimal airflow.

In-Duct Balancing

Method for measuring and balancing airflow directly within the ductwork.

ZRT VentZone® Balancing

Specific procedures for balancing airflow in ZRT VentZone® systems.

MAINTENANCE

General Maintenance

Air Filters

Recovery Core

Condensate Drain Cleaning