EasyManua.ls Logo

ALDI 4x4 TOUGH 22-72020 - Specifications; Intended Use

ALDI 4x4 TOUGH 22-72020
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Contents
Specications
1 x Pair 7” driving lights including mounting brackets
1 x 22” Light bar including mounting brackets
1 x Wiring harness kit including:
• 1 x 12V relay
• 1 x 24V relay
• 2 x piggyback connectors
1 x Instruction manual
1 x Warranty card
Intended Use
The 7” LED Driving Lights and 22” LED Light Bar Set have been designed for use in 4x4 o road journeys.
Modern vehicles are increasingly equipped with complex electronics and it is highly recommended that
these Driving lights are installed by a qualied automotive technician to ensure that they are installed
without aecting the vehicles electrical system. A qualied automotive electrician is trained to ensure the
installation will meet the ADR (Australian Design Rule) regulatory requirements within your state. The warranty
may be void in the event of incorrect installation using other than a licensed automotive technician.
The 7” Driving lights and 22” LED Light Bar set have not been designed for commercial, trade or industrial
applications. The warranty will be void if the lights are used under these circumstances.
Please read and understand this user guide before using the Driving Lights and Light Bar set to prevent
physical injury and / or property damage and save these instructions for future reference.
If you have any questions, our Customer service team are only a phone call away.
DESCRIPTION OF SYMBOLS
The rating plate on the product and within this manual show the following symbols. These represent IMPORTANT
information about the product or instructions for its use.
6
SPECIFICATIONS FOR THE 7" DRIVING LIGHTS
Lumen Output:
Single: 7500 Lumen
Pair: 15000 Lumen
Distance to 1 LUX(Pair) 1100m        
Input Voltage: 12V DC/24V DC
Input Wattage:
Single/Pair @ 12V: 108W/216W
Single/Pair @ 24V: 110W/220W
Current Draw:
Single/Pair @ 12V: 9A/18A
Single/Pair @ 24V: 4.6A/9.2A
LED Type Osram
IP Rating IP68
Colour Temperature: 6000K-6500K
Lens Material Polycarbonate
LED Light Measurement/Single 177.5 x 177.5 x 72mm
SPECIFICATIONS FOR THE LED LIGHT BAR
Lumen Output: 5173 Lumen
Distance to 1 LUX(Pair) 315m
Input Voltage: 12V DC/24V DC
Input Wattage:
@ 12V 72W
@ 24V 72W
Current Draw:
@ 12V 6A
@ 24V 3A
LED Type Osram
IP Rating IP68
Colour Temperature: 6000K-6500K
Lens Material Polycarbonate
LED Light Measurement/Single 565.2 x 73.4 x 65mm

Related product manuals