General safety warnings
• No alterations to the jack shall be made
• Inspect before each use.
• Do not use a Step ladder, standing platform or scaolding support.
• Before attempting any operation, make sure workpieces are properly
supported.
• Stop immediately if the work piece or the clamping jaws move when
operating.
• Make sure the work piece is secure before attempting any operation
using the clamping jaws
• Make sure all moving parts are free from interference.
• Keep other persons away. Do not let persons, especially children,
not involved in the work touch the product and keep them away from
the work area.
• Check the product to make sure that all xing screws and knobs
are tightened.
• Dress properly. Do not wear loose clothing or jewelry;
they can be caught by moving parts.
• Nonskid footwear is recommended when working outdoors.
Wear protective hair covering to contain long hair.
• Do not use product in damp or wet locations. A moist work piece or
damp pad may prevent the clamp from gripping firmly. A dry condition
is introduced to this product.
• This product is ONLY used for clamping the small workpiece,
ie short wood, short steel tube. And drilling, cutting, filing, sawing
and assembly can be conducted on this product.
• Wipe clean with a dry cloth. Always store your portable clamping jaws
in a dry place, out of the reach of children and do not allow use by
persons unfamiliar with it.
• When not in use, fold up the portable clamping jaws for easier storage
ensuring it is covered and is protected from dust, moisture etc.
5
To Next Page
Loading...
General