General safety warnings
• Save all warnings and instructions for future reference.
Read - Study and understand all warnings and operating instructions
before operating this device.
• Take care when lifting or moving the clamping stand. Ensure you use
the correct lifting techniques when lifting heavy objects.
• Prior to using the clamping stand ensure that the stand is located on
a sound and suitable surface where all three legs are touching the
ground.
• Never overload the clamping stand beyond its rated capacity.
• Ensure that your work area is clean and that there are no obstructions
or debris lying around.
• Use the clamping stand in a well lit area.
• Never store the clamping stand out in the elements.
• Do not sit or stand on the clamping stand at any time.
• The clamping stand must be used only for its prescribed purpose. Any
other use then those mentioned in this instruction manual will be
considered a case of misuse. The manufacturer shall not be liable for
any damage or injury resulting from such case of misuse.
• Never alter or change the product specications in any way. Changing
or altering the product would void your warranty, could cause damage
to your work piece or could cause serious injury.
• Always ensure that the clamping stand legs have been locked into
place before use.
• This jaw horse is designed for use on hard and level surfaces only.
• Before every use the workbench shall be checked for damages.
• For protruding work pieces a tilting danger exists! A safe stand is
required for sufficient support.
4
To Next Page
Loading...
General