AFTER SALES SUPPORT
GB
IRE
00800 52323000
service@cranesportsconnect.com
1. Before starting the charge process, dry the charging contacts on the back of the Smart-
watch thoroughly if necessary to avoid corrosion.
2. Place the Smartwatch with its back on the charging contacts of the charger
2
so that the
charging cable is pointing to 09:00 (see fig. B).
The charger attaches magnetically and easily locks into place.
Incorrectly connecting the charger may cause the Smartwatch or cable to heat
up. Make sure that the metal pins fit the charging contacts of the Smartwatch
perfectly when connecting the charger.
3. Connect the USB cable of the charger to the USB port of a PC or to a USB mains adapter.
Make sure that the PC is switched on or the USB mains adapter is connected to the mains.
A bar for the
symbol blinks on the OLED display
6
during the charging process.
The rechargeable battery is fully charged once all bars in the battery symbol are displayed
To Next Page
Loading...
