GB
IRE
00800 52323000
service@cranesportsconnect.com
Configuring notifications
1. On your smartphone or tablet, open the Crane Connect app and access the settings for the
Smartwatch
1
.
2. Scroll down to “Alert settings”.
3. Activate the desired notification functions by pushing the corresponding slider to the right
(
).
If you would like to configure how the Smartwatch is to alert you of a notification, push the
arrow to the right of the slider.
You now have the choice of setting the flashing frequency (“Flash”) of the OLED display
6
(“Off”, “Single” or “Multiple”), the dialling tone (“Off”, “Single” or “Multiple”) and the intensity
of the vibration (“Off”, “Weak” or “Strong”).
You also have the option of defining the duration of each status signal. Use the “Duration”
slider to select a time between 1 and 5 seconds.
To Next Page
Loading...
