GB
IRE
00800 52323000
service@cranesportsconnect.com
Activating sleep mode
Wear the Smartwatch when you go to bed and set the “Auto Sleep” in the Crane Connect app or
activate the sleep mode on the Smartwatch as follows:
1. In time mode, push the lower button
5
three times to access sleep mode.
2. Hold the upper button
3
down for 2seconds to turn sleep mode on.
To confirm, the
symbol will appear.
You can check at any time whether the Smartwatch is in sleep mode.
− Push the upper button once shortly. You will see the
symbol in sleep mode. Pushing the
upper button repeatedly will cause the display to switch between the time and current
sleeping time.
To Next Page
Loading...
