AFTER SALES SUPPORT
1 800 898 750
Aus
Aldi.aftersales@axima.com.au CPL-2054
The voltage display shows the current
voltage of the battery.
The battery symbol on the display shows the
charging condition of the battery.
The lled bars show the existing capacity, whilst
the empty bars show the missing charge. The as-
hing frame around the battery symbol indicates
that the battery is charging.
The battery is fully charged when all bars are lled,
and the frame has stopped ashing. The charger
then switches to trickle charging to maintain the
battery in its fully charged condition.
The voltage display shows the current
voltage of the battery.
The battery symbol on the display shows the
charging condition of the battery.
The lled bars show the existing capacity, whilst
the empty bars show the missing charge. The as-
hing frame around the battery symbol indicates
that the battery is charging.
The battery is fully charged when all bars are lled,
and the frame has stopped ashing. The charger
then switches to trickle charging to maintain the
battery in its fully charged condition.
Charging program
Particularly suited for 12 V batteries with 1.2 to 14
Ah. Gentle charging due to low charging current
(14.4 V/0.8 A).
If the program was selected and started with the
MODE key (7), the program symbol appears
on the display.
Charging program
Designed for standard 12 V vehicle batteries from
14 to 120 Ah. Ecient charging due to higher
charging current (14.4 V/3.8 A).
Once the program has been selected and started
using the MODE key (7), the program symbol
appears on the display.
12