AFTER SALES SUPPORT
1 800 898 750
Aus
Aldi.aftersales@axima.com.au CPL-2054
3.4 Charging process
Note
Depending on the charging condition of the battery, the charger adapts the
charging currents to ensure optimum charging of the battery.
During the main charging phase, the battery is charged with the maximum
charging current. Shortly before the maximum charging capacity has been
reached the charging current is reduced. This ensures gentle and optimum
charging up to the battery’s maximum capacity.
6V charging program
Special program for 6 V batteries of 1.2 to 14 Ah.
Adjusted charging current (7.3 V / 0.8 A).
When starting the program by pressing the MODE
key (7), the program symbol
6V appears on the
display.
The voltage display shows the current
voltage of the battery.
The battery symbol on the display shows the
charging condition of the battery.
The lled bars show the existing capacity, whilst
the empty bars show the missing charge. The as-
hing frame around the battery symbol indicates
that the battery is charging.
The battery is fully charged when all bars are lled,
and the frame has stopped ashing. The charger
then switches to trickle charging to maintain the
battery in its fully charged condition.
11
To Next Page
Loading...
Need help?
General