ALDI AUTOXS MD 19787 - Operation; Connecting the charger to the battery

Operation
22
Operation
− Remove the product from the packaging and remove all the packaging material
and the protective fi lm on the display.
Connecting the charger to the battery
The charger will automatically recognise the battery type connected (6V or 12V
battery).
WARNING!
Risk of electric shock!
There is a risk of electric shock from live parts of the appliance.
− Always unplug the mains plug
4
from the mains socket
before attaching the connection clamps to the terminals on the
battery or removing them.
Before disconnecting a car or motorcycle battery, fi rst consult the vehicle’s
instruction manual on the potential consequences of disconnecting the
battery.
− If the battery that you wish to charge is connected in the vehicle, fi rst disconnect
the vehicle's negative terminal connection cable (black)
6
from the battery's
negative terminal before the charging or trickle charging process. The battery’s
negative terminal is usually connected to the vehicle’s bodywork.
− Then disconnect the vehicle's positive terminal connection cable (red)
8
from
the battery's positive terminal.
− Then attach the charger's positive terminal clamp (red) to the battery's positive
terminal and then the negative terminal clamp (black) to the battery's negative
terminal, at a distance from the battery and the fuel pipe (see fi g. C).
− Connect the battery charger's mains cable
4
to a mains socket.