What to do if the ALDI FERREX FABH 20-I Drill bit doesn't penetrate the material?
If the ALDI Drill bit barely penetrates the material, ensure you're using the correct drill bit for the material. If drilling into concrete or masonry, switch the drill to hammer drilling and set the rotation switch to right-hand rotation.
Why is the On/Off switch not functioning on my ALDI FERREX FABH 20-I Drill?
If the On/Off switch on your ALDI Drill isn't working, check that the rotation switch is not in the middle position. Set the switch to either right-hand or left-hand rotation.
Lists and describes the numbered parts of the rotary hammer drill and its accessories.
Details the quick-action drill chuck provided with the rotary hammer drill.
Provides guidance on how to read, understand, and store the user manual for future reference.
Defines the intended applications for the rotary hammer drill and lists prohibited uses to prevent misuse.
Outlines potential hazards and risks that may arise from the product's design, even with proper use.
Clarifies the meaning of various symbols used throughout the user manual and on the product itself.
Explains the meaning of signal words like WARNING, CAUTION, and NOTICE used in the manual.
Presents essential safety guidelines applicable to all power tool operations, emphasizing hazard avoidance.
Details safety requirements for maintaining a clean, well-lit work area and keeping it free from hazards.
Outlines critical safety rules concerning electrical connections, grounding, and use in wet conditions.
Covers personal protective equipment, alertness, and preventing unintentional starting of the tool.
Provides instructions on proper operation, maintenance, and handling of the power tool to ensure safety and longevity.
Offers specific guidelines for safely charging, handling, and storing rechargeable batteries for cordless tools.
Details essential procedures and precautions for servicing the power tool by qualified personnel.
Provides specific safety precautions and warnings for operating the tool in demolition breaker mode.
Offers crucial safety advice and precautions to be followed when performing drilling operations with the tool.
Specific safety guidelines to follow when using long drill bits with the rotary hammer drill.
Instructions on how to inspect the product and verify all included items after unpacking.
Step-by-step guide on how to correctly insert and use SDS-Plus masonry drill bits for drilling into hard materials.
Instructions on how to attach and use standard drill bits for wood and metal with the quick-action drill chuck.
Guide on how to insert and use screwdriver bits or adapters with the quick-action drill chuck.
Explains how to use the rechargeable battery with the tool, including safety warnings.
Details the process for charging the rechargeable battery pack according to the manual.
Provides step-by-step instructions for inserting and removing the rechargeable battery from the tool.
Comprehensive guide on operating the rotary hammer drill for various tasks, including starting and stopping.
Explains how to select the drilling, hammer drilling, or screwing mode and set the rotation direction.
Provides instructions on how to resolve situations where the tool becomes jammed or locked up during operation.
Offers helpful advice and techniques to enhance user safety and efficiency when operating the tool.
Detailed instructions on how to clean the rotary hammer drill after each use to maintain its condition.
Recommendations for storing the product and battery safely when not in use.
Instructions for separating and disposing of packaging materials according to recycling guidelines.
Guidance on how to properly dispose of the product in compliance with WEEE regulations.
To Next Page
General
