Transport
22
− Always keep the vent slots on the housing free of dust to prevent the product
from overheating.
− If necessary, use a soft cloth to rub down the product and accessories after
cleaning.
Inspecting the product
Check the condition of the product regularly. Among other things, check to make sure:
− the switches
3
/
4
/
8
are not damaged (see Fig.A),
− the SDS-Plus shank holder
1
and the quick-action drill chuck
6
are in perfect
condition,
− the vents are unobstructed and clean. If applicable, use a soft brush to clean
them.
If you identify any damage, you must have it repaired by a specialist workshop
to prevent risks.
There are no parts that the user needs to service or lubricate inside the product.
Transport
− Always hold the product by the grip areas when carrying it.
− Switch off the product and remove the rechargeable battery (not included in the
package contents) when transporting the product.
− Protect the product and accessories from severe impacts and vibrations.
− Secure the product from falling down, falling over and sliding on inclined surfaces.
Storage
− Remove the rechargeable battery (not included in the package contents) from
the product when you are not using it and store separately.
− Store the product and the quick-action drill chuck in a dry place inaccessible to
children.
− Always store the battery in a dry place.
− Protect the battery from direct sunlight.
− Store the battery so that it is not accessible to children, securely locked away and
at a storage temperature between 5°C and 20°C (room temperature).
To Next Page
Loading...
