ALDI Ferrex FAH 20-I - Technical data; General information

Technical data
24
If you identify any damage, you must have it repaired by a specialist workshop
to prevent risks.
Storage
1. Clean the product thoroughly prior to storage (see chapter “Cleaning”).
2. Make sure the protective blade cover
5
is pushed onto the cutter bar
1
.
3. If possible, store the clean product in the original packaging. Alternatively, you
can hang the product on a strong wall hook or similar. There is an opening in the
impact protection
6
for this purpose (see Fig. I). Make sure that the mounting
hardware can support the weight of the product.
Transport
− Hold the product with one hand on the handle
4
and the other hand on the
guide handle
3
. Do not carry the product by the cutter bar
1
.
− Secure the product to prevent it from slipping when transporting it in a vehicle.
− If possible, use the original packaging for transport.
Technical data
General information
Article number: 805005
Model: FAH 20-I
Model number: WU5420113 / WU5420114
Idle stroke rate n
0
: 2,400 rpm
Blade length: 560 mm
Cut length: 510 mm
Cutting thickness: max. 14 mm
Weight (without rechargeable
battery): 1.9 kg