General information
8
Residual risks
Despite proper use, inconspicuous residual risks cannot be completely ruled out.
The following risks may arise due to the design of the product:
• touching the moving or stationary cutting blades in uncovered areas;
• reaching into the running cutting blades (cutting injury);
• eye damage caused by flying plant parts if protective goggles are not worn;
• hearing loss if suitable ear protection is not worn;
• injury to health attributed to hand-arm vibration emissions if the device is used
over a prolonged period of time or is not guided and maintained properly.
Explanation of symbols
The following symbols are used in this user manual, on the product or on the
packaging.
This symbol provides you with useful supplementary information about
commissioning and usage.
Declaration of Conformity (see “Declaration of Conformity” chapter):
Products marked with this symbol meet all applicable Community regu-
lations for the European Economic Area.
Read the user manual.
Wear protective goggles.
Wear ear protection.
Wear suitable secure footwear.
Wear suitable protective gloves.
Do not expose the product to rain. Do not use it in wet or damp
conditions.
To Next Page
Loading...
Need help?
General
