ALDI FERREX LBH2600P - General Safety Warnings

16
AUS
Technical data/Attachment and operating
Subject to technical changes!
Information concerning noise emission measured according to relevant standards:
Sound pressure L
pA
= 97 dB(A)
Sound power L
WA
= 108.4 dB(A)
Guaranteed sound power level: L
WA
= 110 dB(A)
Uncertainty K
PA
= 3 dB(A)
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Vibrations:
Lower handle: A
hv
= 15.1 m/s²
Upper handle: A
hv
= 11.92 m/s²
Uncertainty K
PA
= 1.5 m/s²
Reduce noise generation and vibration to a minimum!
• Use only equipment that is in perfect condition.
• Maintain and clean the equipment regularly.
• Adopt your way of working to the equipment.
• Do not overload the equipment.
• Have the equipment checked if necessary.
• Switch off the equipment when not in use.
• Wear gloves.
In these operating instructions we have marked the places that have to do with your
safety with this sign: m
VII. Attachment and operating
ATTENTION!
Before working on the device - cleaning, inspection, maintenance or other work - always
turn off the device.
ATTENTION!
Remove transport protection ring (23) Fig. 1
Assembly blower(Fig. 7-9)
m Warning: The blower must not be used or switched on until it has been fully as-
sembled.
• Remove the screw (K) and its washers (L).
• Align the first blower tube(4) compartment with the protrusion of the air outlet, push