ALDI Ferrex WDV12 User Manual

16
AFTER SALES SUPPORT
 support@scheppach.com.au
 1300 855 831
MODEL: WDV12 PRODUCT CODE: 703406 10/2020
AUS
Operation WDV12
Wet vacuuming (Fig. 1.3)
For wet-vacuuming, use the foamed plastic lter (12). Ensure that the foamed plastic
lter (12) is correctly mounted.
When wet vacuuming, the safety oat valve on the lter basket (9) will close when
the maximum level is reached. The motor will continue running, but the suction will
decrease signicantly. For emptying instructions, read the "Maintenance and clean-
ing" chapter.
Use the oor nozzle (15) for surface cleaning applications.
Danger! The appliance is not suitable for the vacuuming of combustible and hot
liquids.
For wet vacuuming, use only the supplied foamed plastic lter (12).
Blowing (Fig. 7)
Use the crevice nozzle (16) for blowing applications to clean dust and dirt in hard to
reach places.
Using as a dust collector (Fig. 1)
To use as a dust collector, ensure the cloth lter (14) and paper bag (13) are properly
inserted.
Switch o󰀨 the appliance and connect the suction hose (11) to your power tool.

ALDI Ferrex WDV12 Specifications

General

Brand	ALDI
Model	Ferrex WDV12
Category	Vacuum Cleaner
Language	English